200_QMPLAIN_P4_Icon
L-W-QMSOFT

The gauge management software QMSOFT®

Modules

Inspection program QMSOFT® / QM-PLAIN

The inspection program QMSOFT®/QM-PLAIN is designed for the inspection of the following types of plain gauges:

  • GO Plain ring gauges acc. to DIN 7150-2:2007, BS 269:1982, ANSI/ASME B89.1.6M, NF E 02-202
  • NO GO ring gauges acc. to DIN 7150-2:2007, BS 269:1982, ANSI/ASME B89.1.6M, NF E 02-202
  • Master rings acc. to DIN 2250-1, BS 4064, BS 4065, ANSI/ASME B89.1.6M, NF E 11-011
  • GO plain plug gauges acc. to DIN 7150-2:2007, BS 269:1982, ANSI/ASME B89.1.6M, NF E 02-202
  • NO GO plain plugs acc. to DIN 7150-2:2007, BS 269:1982, ANSI/ASME B89.1.6M, NF E 02-202
  • GO/NO GO plain plug gauges acc. to DIN 7150-2:2007, BS 269:1982, ANSI/ASME B89.1.6M
  • GO plain snap gauges acc. to DIN 7150-2:2007
  • NO GO plain snap gauges acc. to DIN 7150-2:2007
  • GO/NO GO (double sided) plain snap gauges acc. to DIN 7150-2:2007
  • Master setting disks (Style 1, 2 and 3) acc. to ANSI/ASME B89.1.6M
  • Rod gauges with spherical ends acc. to DIN 7150-2:2007
  • Check plugs for snap gauges acc. to DIN 7150-2:2007
  • Setting standards for micrometers acc. factory standards

The inspection itself runs in accordance with the related VDI/VDE/DGQ 2618 guidelines. The user has to enter the type and size of the gauge being inspected. QMSOFT®/QM-PLAIN automatically evaluates the whole set of gauge nominal values. It is also possible to use customer specific gauge nominal data.

Results can be produced on the screen and/or the printer and/or in a file. The nominal values of the gauge will be processed in connection with the inspection conditions and the measurement results in the results record. Tolerance excesses are marked and identified. It is possible to customize calibration certificates using the so called "certificate layout files" (templates).

Screenshot

The program can be started up directly from the QMSOFT®/QM-MANAGE gauge data management system. In this case it will receive all necessary nominal data necessary directly from the data base. At the end of the inspection the results and the calibration certificate will automatically be transferred back to the data base program.

Top